Sioux-tools 5375AP Bedienungsanleitung
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Elektrowerkzeuge Sioux-tools 5375AP herunter. Sioux Tools 5375AP User Manual Benutzerhandbuch
- Seite / 20
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Page No 1
Safety rules when using 5375A/
5375AP Impact Wrenches
– Use only impact sockets and extensions, universal
joints, etc. rated as being suitable for use with impact
wrenches.
– Prolonged exposure to vibration may cause injury.
–Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
– Do not exceed the maximum working air pressure.
– Use personal protection equipment as recommended.
– Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
– Use only compressed air at the
recommended conditions.
– If the tool appears to malfunction,
remove from use immediately and
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
to the tool and write or have written a
warning note and attach it to the tool.
– If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspension/support device.
– When operating the tool, always keep
the body and particularly the hands away from the work-
ing attachment fixed to the tool.
– The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
– Always when using the tool, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
– Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained to do so.
– Do not lock, tape, wire, etc. the ‘On/Off’ valve in ‘On’
position. The trigger/lever, etc. must always be free to
Vibration Level Less Than 3.6 Meters / Sec
2
Test Method: Tested in accordance with ISO
standards 8662 Parts 1 & 7
Noise Level: Sound Pressure Level 81.94 dB(A)
Sound Power Level 92.94 dB(A)
Test Method: Tested in accordance with Pneurop
test code PN8NTC1 and ISO Standard 3744
Air Pressure
Recommended Working 6.2 bar 90 PSI
Maximum 6.2 bar 90 PSI
Recommended Use Of
Balancer Or Support
N0
Product Net Weight
8.50 lbs
3.86 Kg
Recommended Max.
Hose Length
30 Ft 10 M
Recommended Hose Bore
Size – Minimum
3/8 ins 10 mm
Serial No.
Model No/Nos
5375A With Friction Ring
Anvil
5375AP With Tru Hole Pin
Anvil
Max. RPM
4,000
Cycles Per Min.
Product Type
3/4" Air Impact Wrenches
Important
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
Operator Instructions
Includes – Foreseen Use, Work Stations, Putting Into Service,
Operating, Dismantling, Assembly and Safety Rules.
Manufacturer/Supplier
Sioux Tools, Inc.
250 Snap-on Drive
P.O. Box 1596
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765 Fax No. 828-835-9685
CE
SAFETY MESSAGES
Personal Safety Equipment
Use – Safety Glasses YES
Use – Safety Gloves
Use – Safety Boots
Use – Breathing Masks
Use – Ear Protectors YES
WARNING
Always Read Instructions
Before Using Power Tools
Always Wear Safety
Goggles
Wear Hearing Protection
Avoid Prolonged Exposure
To Vibration
Figure 1Recommended Air Supply System
Model 5375A/5375AP
3/4"Air Impact Wrenches
Form # ZCE792
Date 2008 Dec 20/A
- Model 5375A/5375AP 1
- Air Supply 2
- Reassembly 3
- Modèle 5375A/5375AP 4
- Alimentation d’air 5
- Remontage 6
- Modell 5375A/5375AP 7
- Luftzufuhr 8
- Dauer des Werkzeugeinsatzes 9
- Modelo 5375A/5375AP 10
- Suministro de aire 11
- Declaración de Conformidad 12
- Lucht toevoer 14
- Sioux Tools Inc 15
- Opnieuw monteren 15
- Modello 5375A/5375AP 16
- Alimentazione dell’aria 17
- Istruzioni per montaggio e 18
- Rimontaggio 18
- Friction Ring Anvil 19
- Thru Hole Pin Anvil 19
- Page No 20 20
Inhaltsverzeichnis
Seite 1 - Model 5375A/5375AP
Page No 1Safety rules when using 5375A/5375AP Impact Wrenches– Use only impact sockets and extensions, universaljoints, etc. rated as being suitable f
Seite 2 - Air Supply
Page No 10CENivel de vibración: Menos de 3,6 metros/seg2Método de prueba: Prueba efectuada de acuerdocon las normas ISO 8662, partes 1 & 7Ni
Seite 3 - Reassembly
Page No 11Uso anticipado de la herramienta –5375A/5375APLa llave de impacto ha sido diseñada para apretar y aflojar losfijadores de rosca dentro de la
Seite 4 - Modèle 5375A/5375AP
Page No 12Impreso en TaiwanDeclaración de ConformidadSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Llaves de impacto de 3/
Seite 5 - Alimentation d’air
Page No 13Trillingsnivo: Minder dan 3,6 m/sTest methode: getest in overeenstemming metISO 8662, gedeelte 1 & 7Geluidsnivo: Geluidsdruk niveau
Seite 6 - Remontage
Page No 14Te verwachten gebruik van hetgereedschap – 5375A/5375APDe slagmoersleutel is alleen ontworpen voor het aandraaien enlosdraaien van met schro
Seite 7 - Modell 5375A/5375AP
Page No 15Gedrukt in TaiwanKonformiteitsverklaringSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Modellen 5375A/5375AP 3/4&
Seite 8 - Luftzufuhr
Page No 16CELivello di vibrazioni Meno di 3,6 m/sec2Metodo di collaudo: Collaudato secondo glistandard ISO 8662, parti 1 e 7Rumorosità:
Seite 9 - Dauer des Werkzeugeinsatzes
Page No 17Postazioni di lavoroL’utensile deve essere usato solo come strumento a mano. Siraccomanda di usare l’utensile stando in piedi su un piano so
Seite 10 - Modelo 5375A/5375AP
Page No 18Stampato in TaiwanDichiarazione di conformitàSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Chiavi pneumatiche da
Seite 11 - Suministro de aire
Page No 195375A 3/4" Air Impact Wrench withFriction Ring Anvil5375AP 3/4" Air Impact Wrench withThru Hole Pin AnvilRef. No. Part No.Descript
Seite 12 - Declaración de Conformidad
Page No 2return to the ‘Off’ position when released.– Always shut off the air supply to the tool and press the‘On/Off’ valve to exhaust the air from t
Seite 13
Page No 20
Seite 14 - Lucht toevoer
Page No 3Declaration of ConformitySioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.declare under our sole responsibility that
Seite 15 - Opnieuw monteren
Page No 4Règles de sécurité pour l’emploi desclés à chocs 5375A/5375AP• Employez seulement des douilles, rallonges, cardans,etc. pour clé à choc qui r
Seite 16 - Modello 5375A/5375AP
Page No 5Stations de travailCet outil est destiné à un usage manuel seulement. On recommanded’employer l’outil en position debout et sur un sol ferme.
Seite 17 - Alimentazione dell’aria
Page No 6Impremé au TaiwanCEDéclaration de conformitéSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.. Clés à chocs de 3/4 p
Seite 18 - Rimontaggio
Page No 7Vibrationspegel: Weniger als 3,6 m/Sek.Testverfahren: Getestet nach der ISO-Norm8662 Teile 1 & 7Lärmpegel:Lärmdruckpegel
Seite 19 - Thru Hole Pin Anvil
Page No 8Vorgesehener Einsatzbereichdes Werkzeugs – 5375A/5375APDer Schlagschrauber ist zum Festziehen und Lösen vonVerbindungselementen mit Gewinden
Seite 20 - Page No 20
Page No 9Gedruckt in TaiwanCEKonformitätserklärungSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Modell 5375A/5375AP 3/4 Zo
Verwandte Produkte und Handbücher für Elektrowerkzeuge Sioux-tools 5375AP
(34 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.265 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern