Sioux-tools IW38HAP-7Q Bedienungsanleitung PDF herunterladen

Page No 1

Safety rules when using IW38HAP-3P/

IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/

IW38HAP-7Q Impact Wrenches

– Use only impact sockets and extensions, universal

joints, etc. rated as being suitable for use with impact

wrenches.

– Prolonged exposure to vibration may cause injury.

–Read all instructions before using this tool. All

operators must be fully trained in its use and aware of

these safety rules.

– Do not exceed the maximum working air pressure.

– Use personal protection equipment as recommended.

– Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains

chemicals known to cause cancer, birth defects and other

reproductive harm.

– Use only compressed air at the

recommended conditions.

– If the tool appears to malfunction,

remove from use immediately and

arrange for service and repair. If it is

not practical to remove tool from

service, then shut off the air supply

to the tool and write or have written a

warning note and attach it to the tool.

– If tool is to be used with a balancer or

other suspension device, ensure that

the tool is firmly attached to the

suspension/support device.

– When operating the tool, always keep the body and

particularly the hands away from the working attach-

ment fixed to the tool.

– The tool is not electrically insulated. Never use the tool

if there is any chance of coming into contact with live

electricity.

– Always when using the tool, adopt a firm footing and/or

position and grip the tool sufficiently only to overcome

any reaction forces that may result from the tool doing

work. Do not overgrip.

– Use only correct spare parts for maintenance and

repair. Do not improvise or make temporary repairs.

Major servicing and repairs should only be carried out

by persons trained to do so.

– Do not lock, tape, wire, etc. the ‘On/Off’ valve in ‘On’

position. The trigger/lever, etc. must always be free to

Vibration Level 1.78 Meters / Sec

Test Method: Tested in accordance with ISO

standards 8662 Parts 1 & 7

Noise Level: Sound Pressure Level 86.0 dB(A)

Sound Power Level 99.0 dB(A)

Test Method: Tested in accordance with Pneurop

test code PN8NTC1 and ISO Standard 3744

Air Pressure

Recommended Working 6.2 bar 90 PSI

Maximum 6.2 bar 90 PSI

Recommended Use Of

Balancer Or Support

Product Net Weight

IW38HAP-3P 3.6 lbs 1.68 kgs

IW38HAP-3F 3.6 lbs 1.68 kgs

IW38HAP-4P 3.7 lbs 1.69 kgs

IW38HAP-4F 3.7 lbs 1.69 kgs

IW38HAP-7Q 3.9 lbs 1.78 kgs

Recommended Max.

Hose Length

30 Ft 10 M

Recommended Hose Bore

Size – Minimum

3/8 ins 10 mm

Serial No.

Model No/Nos

IW38HAP-3P (3/8" Pin)

IW38HAP-3F (3/8" Friction Ring)

IW38HAP-4P (1/2" Pin)

IW38HAP-4F (1/2" Friction Ring)

IW38HAP-7Q (7/16" QC)

Max. RPM

9,000

Cycles Per Min.

Product Type

3/8" Twin Hammer Pistol

Grip Impact Wrenches

Important

Read these instructions carefully before installing, operating,

servicing or repairing this tool. Keep these instructions in a safe

accessible place.

Operator Instructions

Includes – Foreseen Use, Work Stations, Putting Into Service,

Operating, Dismantling, Assembly and Safety Rules.

Manufacturer/Supplier

Sioux Tools, Inc.

250 Snap-on Drive

P.O. Box 1596

Murphy, NC 28906

U.S.A.

Tel No. 828-835-9765 Fax No. 828-835-9685

SAFETY MESSAGES

Personal Safety Equipment

Use – Safety Glasses YES

Use – Safety Gloves

Use – Safety Boots

Use – Breathing Masks

Use – Ear Protectors YES

WARNING

Always Read Instructions

Before Using Power Tools

Always Wear Safety

Goggles

Wear Hearing Protection

Avoid Prolonged Exposure

To Vibration

Figure 1Recommended Air Supply System

Model IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/

IW38HAP-4F/IW38HAP-7Q

3/8" Twin Hammer Pistol Grip Impact Wrenches

Form # ZCE726A

Date 2005 OCTOBER 14/A

1 2 3 4 5 6 ... 20 21

Inhaltsverzeichnis

Seite 1 - IW38HAP-4F/IW38HAP-7Q

Page No 1Safety rules when using IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/IW38HAP-7Q Impact Wrenches– Use only impact sockets and extensions, unive

Seite 2 - Air Supply

Page No 10CENivel de vibración: 1,78 metros/seg2Método de prueba: Prueba efectuada de acuerdocon las normas ISO 8662, partes 1 & 7Nivel d

Seite 3 - Reassembly

Page No 11Uso anticipado de la herramienta –IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/IW38HAP-7QLa llave de impacto ha sido diseñada para apretar y

Seite 4 - Important

Page No 12Impreso en JapónDeclaración de ConformidadSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Llaves de impacto modelo

Seite 5 - Alimentation d’air

Page No 13Trillingsnivo: 1,78 m/sTest methode: getest in overeenstemming metISO 8662, gedeelte 1 & 7Geluidsnivo: Geluidsdruk niveau 86,0

Seite 6 - Remontage

Page No 14Te verwachten gebruik van hetgereedschap – IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/IW38HAP-7QDe slagmoersleutel is alleen ontworpen voor

Seite 7 - 3/8 Zoll Schlagschrauber mit

Page No 15Gedrukt in JapanKonformiteitsverklaringSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Modellen IW38HAP-3P/IW38HAP

Seite 8 - Luftzufuhr

Page No 16CELivello di vibrazioni 1,78 m/sec2Metodo di collaudo: Collaudato secondo glistandard ISO 8662, parti 1 e 7Rumorosità: Pressione acust

Seite 9 - Dauer des Werkzeugeinsatzes

Page No 17Postazioni di lavoroL’utensile deve essere usato solo come strumento a mano. Siraccomanda di usare l’utensile stando in piedi su un piano so

Seite 10

Page No 18Stampato in GiapponeDichiarazione di conformitàSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Chiavi pneumatica M

Seite 11 - Suministro de aire

Page No 19IW38HAP-3P 3/8" Impact Wrench with Pin AnvilIW38HAP-3F 3/8" Impact Wrench with Friction Ring AnvilIW38HAP-4P 3/8" Impact Wren

Seite 12 - Instrucciones para montar y

Page No 2return to the ‘Off’ position when released.– Always shut off the air supply to the tool and press the‘On/Off’ valve to exhaust the air from t

Seite 13

Page No 20

Seite 14 - Lucht toevoer

This pdf incorporates the following model numbers: IW38HAP-3F IW38HAP-3P IW38HAP-4F IW38HAP-4P IW38HAP-7Q

Seite 15 - Opnieuw monteren

Page No 3Declaration of ConformitySioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.declare under our sole responsibility that

Seite 16 - Chiavi pneumatica con doppio

Page No 4Règles de sécurité pour l’emploi des clés àchocs IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/IW38HAP-7Q• Employez seulement des douilles, ral

Seite 17 - Alimentazione dell’aria

Page No 5Stations de travailCet outil est destiné à un usage manuel seulement. On recommanded’employer l’outil en position debout et sur un sol ferme.

Seite 18

Page No 6Imprimé au JaponCEDéclaration de conformitéSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A. Clés à chocs Modèles IW

Seite 19 - Page No 19

Page No 7Vibrationspegel: 1,78 m/Sek.Testverfahren: Getestet nach der ISO-Norm8662 Teile 1 & 7Lärmpegel:Lärmdruckpegel 86,0 dB (A)Lärmle

Seite 20 - Page No 20

Page No 8Vorgesehener Einsatzbereich desWerkzeugs –IW38HAP-3P/IW38HAP-3F/IW38HAP-4P/IW38HAP-4F/IW38HAP-7QDer Schlagschrauber ist zum Festziehen und Lö

Seite 21 - IW38HAP-7Q

Page No 9Gedruckt in JapanCEKonformitätserklärungSioux Tools Inc.250 Snap-on Drive, P.O. Box 1596, Murphy, NC 28906, U.S.A.Modell IW38HAP-3P/IW38HAP-3

Kommentare zu diesen Handbüchern

Keine Kommentare

Sioux-tools IW38HAP-7Q Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Elektrowerkzeuge Sioux-tools IW38HAP-7Q herunter. Sioux Tools IW38HAP-7Q User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge Sioux-tools IW38HAP-7Q